Description
The Rocker+ edition comes with an improved fork with reduced clearance for much easier foot jams. The frame has been tweaked with an angled seat clamp and micro drop outs for a super clean looking back end.
This Rocker Mini BMX comes in a special Freecoaster version, which makes it to roll backwards whilst keeping the pedals in the same position.
The Rocker3 has been under the knife for a solid 1 kg reduction in weight compared to the Rocker 2. The most serious Rocker Mini BMX to date and also the most durable. Built for higher speed and bigger tricks. Rocker 3 features a drive sprocket with 9 teeth and a 28 teeth front sprocket.
The tall gearing allows for high speeds and thus much higher airs. With higher airs comes higher impacts. Hence the upgraded 3-piece crank which takes far more abuse. A short back end makes spinning a whole lot easier and the addition of the street pro tires will give you more confidence to throw bigger tricks. Comes with precision sealed wheel bearings for lower rolling resistance.
- Weight reduced hi tensile steel frame
- Taper fork & bar
- Top load stem
- Thread less forks
- 10" x 28" bars
- Plastic BMX pedals with matching kraton rubber grips
- 28/9 gearing
- 9T semi sealed driver
- Precision sealed cartridge bearings
- 3 piece forged steel cranks
- Fat padded seat
- Steel 3 piece wheels with patented Rocker rear wheel hub and 9t driver
- Pneumatic rubber 10" soft compound chunky tires
- Chrome/colored KMC chain
Notice:
- The bike is delivered 80% assembled. All parts must be tightened before use.
- When using a freecoaster hub you will find that it takes a while longer before you start gaining momentum when pedaling. This is called "slack" and can be adjusted in 4 different configurations for much slack to very little. All this can be done without
Total height: | 70cm |
Pegs: | 2 pegs included |
Hub: | Freecoaster, Sealed bearings |
Bar height: | 10" (25.4cm) |
Bar width: | 28" (71.1cm) |
Bar material: | Chrome steel |
Weight: | 10.5kg |
Frame Top Tube: | 12" (30.5cm) |
Frame standover height: | 6.3" (16cm) |
Chainstay length (Center): | 8.46" (21.5cm) |
Headset type: | Integrated 1 1/8" |
Frame material: | Hi-ten steel |
Headtube length: | 100mm |
Gear ratio: | 28/9 |
Axle diameter: | 12mm |
Stem type/Length: | Top load |
Crank Length/Type: | 120mm, Three-piece |
Crank material: | Steel |
Wheel diameter: | 10" |
Wheel type: | Air tire |
Seat: | Combo |
Seatpost Length: | 110mm |
Pedal material: | Plastic |
Max rider weight: | 100kg |
Assembly: | Partly assembled |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.